If you are considering a replacement for your well pump is a big deal, there will be a number of concerns. The situation is not uncommon, but we’ve got you covered. This video has every tip you’ll need to know to install or replace a well pump. Once you’ve completed the task, you’ll have the confidence that comes from a professional!
5 Things to Remember When replacing your well pump
Your pump should be about 300 feet or more. A typical well can reach 50 to 300 feet of depth.
Choose brass fittings or stainless fittings. Every clamp around the pump should be constructed of stainless steel
The 1/2 horsepower power pumps are the best. It pumps over 6 gallons per minute at 75 feet. The pump is capable of reaching 300 feet.
You are able to choose between an old or a new well.
Be sure that your wires are on a flat surface. You should wrap the wires around the pipe at least 12 feet. Connectors should be extended.
Step 3: Remove the cap of the well and place it about 13 inches higher than the ground. Connect the power and reinstall it. tq7zwe7olb.